Firstly, let me introduce to you what ceramic particle adhesive is. Adhesive is a wear-resistant and corrosion-resistant polymer material composed of high-performance wear-resistant ceramic particles and modified toughening resin, used to prepare wear-resistant coatings on the surfaces of various mechanical parts with wear-resistant and corrosion-resistant requirements. Such as repairing pre protected pump bodies, impellers, fan housings, pipe elbows, pipe screw conveyors, etc.
Ceramic particle adhesive is a plastic wear-resistant material that can be used for various irregular shapes. It can be widely used in the production of wear-resistant pipelines. When using ceramic tiles to stick wear-resistant pipes, there will be gaps between the ceramic tiles, which will affect the bonding strength of the ceramic tiles. When the material is washed into the gap, the ceramic tiles will be washed out, and in severe cases, they may fall off. Therefore, filling the gaps with ceramic particle glue is a necessary step, which can effectively improve the service life of ceramic lining.
Ceramic particle adhesive is widely used in various countries for road signs on highways, airports, airport runways, subways, bus stops, parking lots, squares, parks, schools, hotels, and office buildings. This product is a new environmentally friendly material for building landscape communities and beautifying urban environments in the market. The construction technology of ceramic pavement is exquisite, and the specific process requirements are as follows. Meet user needs. Once the anti-skid performance of the road within 300 meters of the toll station is poor, it is easy to produce poor braking effects, leading to pole collisions or rear end collisions. Therefore, the anti-skid performance of the road surface in front of the toll station needs to be strengthened. Road anti-skid coatings are often used in the electronic toll lane division of highway toll stations. The length of a single long tunnel is greater than 1km, with a length of about 30m at the entrance and exit of the tunnel, 250m inside the tunnel, and 50m outside the tunnel. The rest can be fully paved or intermittently paved.
After obtaining the remaining fragments, it is confirmed that the epoxy resin has dried and cured, and any stones that have not adhered to the epoxy resin will be retrieved. Stones without environmental pollution can be reused. Pay attention to the time interval and flatness of the connecting components during the construction of ceramic particle adhesive engineering. Surface treatment for structural layer engineering construction: matching surface color and topcoat treatment. (Cover usage is 0.3 kg/, material is 15). According to the requirements, the mixed structural layer material should be sprayed or rolled on the working surface. And it has a long service life. Reducing the appearance of colorful and bustling anti-skid roads creates a strong visual impact that allows drivers to focus on driving. And it can reduce or even eliminate splashing water and mist. Easy to clean, although the anti slip road surface is rough and easy to absorb dust. But the dirt can be washed clean and the color will be as new as new. The construction steps for anti-skid pavement use water-based sealing primer to seal the foundation.
Ceramics are difficult to connect with metal components of equipment through traditional connection methods such as welding. Ceramic particle adhesive is used for bonding, completing the connection between wear-resistant ceramics and metal components of equipment. This skill has been applied in industries such as power, metallurgy, mining, and cement, and has been widely used and recognized. By using ceramic particle glue, high-purity wear-resistant ceramic pieces are firmly adhered to the surface of equipment that has been severely eroded by materials, extending the service life of the equipment and enhancing its durability.
Editor: Lynn
