Before using ceramic particles, they usually perform basic cleaning work on the product, so that the particles not only have strong adhesion, but also make the paved road clean, sturdy, and durable. What are its cleaning tasks?
If the foundation hardness of ceramic particles is high, sandblasting treatment is required, followed by slight polishing. For foundations with poor strength, they need to be polished with a sanding machine and reinforced with permeable primer.
2. The road surface should be smooth and free of debris, but cracks should be treated before construction, otherwise it may affect the paving effect.
3. Clean up ceramic particles, oil stains and other pollutants on the road surface, add appropriate cleaning agents, and rinse with water. Even if it is stubborn, it should be cleaned or polished off.
After processing, to ensure the road surface is dry, it is recommended to use a hot compressed air machine to dry the road surface, and all solvents should be washed clean.
5. Use kraft paper or tape within the construction area, measure the construction area, calculate the resin content, and ensure that ceramic particles have better effects and higher quality after foundation treatment.
The above is the cleaning work of ceramic particles. Doing a good job in basic cleaning can provide benefits for the subsequent paving of product roads, as well as improve the performance and service life of products and roads.
Editor: Nancy
