Ceramic particle adhesive has properties such as water resistance, oil resistance, and acid and alkali resistance. And clean the rough surface; The treated surface should be a rough, dry, and fresh substrate surface, free from oil stains and dust. What tools are needed for its construction?
1. One engineering cargo vehicle and one passenger car with more than 7 seats.
2. Handheld electric mixer, mixing adhesive AB components, including a 50cm long zigzag dispersion tray.
3. Handheld angle grinder, used for cutting local road bumps or removing pollutants such as ceramic particles, glue, oil stains, etc.
4. There is a dust collector that can be cleaned with a broom and fan, but the spreading situation is not easy to control.
5. A backpack fuel blower is used to move and clean dust and leaves, or remove dispersed ceramic particle glue.
6. One set of motor and one set of lighting system. The construction site of ceramic particle adhesive does not have power supply or needs to be used at night.
7. Cone bucket, reflective signs, and a set of warning lights.
8. Other tools include: funnel cart, handcart, serrated scraper, shovel, screwdriver, and edge banding tape.
9. Labor protection equipment: work clothes, warning clothes, gloves, masks, glasses, and water.
Ceramic particle adhesive should pay attention to controlling the coating thickness to avoid interference during assembly. In maintenance engineering, attention should be paid to the vibration caused by the use of the conveying system or batching system, which can fill cracks and improve the strength and durability of the board.
Editor: Nancy
