Colored ceramic particle anti-skid pavement is a type of pavement coated with special materials. What are the construction methods for its bicycle lane? Here is the editor's summary:
1. The colored ceramic particle anti-skid pavement is constructed using a rake.
2. Adjust the height of the loquat on all sides of the anti-skid road surface with colored ceramic particles to keep it parallel to the ground; If the ground is uneven, you can squat on loquat to gain weight.
3. Add fine aggregate to the road surface and mix. After stirring evenly, add 1-2% curing agent and stir. After stirring evenly, apply it directly to the ground and scrape it clean with a rake.
4. According to the drying time of the curing agent, grasp the dosage of the curing agent, and promptly signal the paint mixing personnel to start painting. Control the pushing and pulling speed of loquat seeds and promptly remind the person scraping loquat seeds to clean up excess paint
5. Impurities or corner paint should be removed in a timely manner. When transporting loquat seeds, do not let the paint stuck to the rake fall onto the finished paint surface. Control the curing time of the paint on the loquat seeds and replace and clean them in a timely manner.
The colored ceramic particle anti-skid pavement has good low temperature resistance and aging resistance, while the ceramic particle has low heat absorption and excellent high temperature resistance. I hope the above content is helpful to you,
Editor: Nancy
